20Y-06-41110 Komatsu PC200-8 PC270-8 Main Wire Harness
When the original harness on your Komatsu PC200-8 PC220-8 has worn out, the 20Y-06-41110 Main Wire Harness is a straightforward way to get the machine back to full function. It is made to the same layout as the original, with matching connectors at every branch.
Specs at a Glance
- Part Name: Main Wire Harness
- Part Number: 20Y-06-41110, 20Y0641110
- Condition: Aftermarket new
- Product Weight: 16 kg / 35.27 lbs
- Brand: TOPARTS
- Feature: Original connector layout; plug-and-play installation
Compatible Models
Komatsu PC200-8, PC220-8, PC240-8, PC270-8
Function Overview
Because it runs through the most exposed areas of the machine, the main harness takes more abuse than almost any other electrical part. Swinging, vibration, dust, washdowns and rodents all take their toll, which is why it is one of the most commonly replaced harnesses on older machines.
Laid out around the frame and through the house of the excavator, this harness is the long-distance carrier of the electrical system. It ties together the cab controls, controllers, pump and valve solenoids, sensors and lighting into one connected network.
Komatsu machines use monitor-based diagnostics, and a harness fault frequently appears as an error code that clears and returns. Replacing worn wiring is a common fix for these recurring codes.
When to Replace It
You may notice:
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Monitor warnings that disappear when the machine is stopped
- Blown fuses that keep recurring with no obvious cause
- Rodent damage, crushed sections or wires worn through where the harness rubs the frame
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Construction and Quality
The goal is simple: a harness that fits like the original and keeps working like it. Matching connectors, correct branch lengths and durable insulation mean stable performance and high reliability in daily heavy-duty use.
FAQ
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
Do I need special tools to install it?
Standard hand tools are usually enough. Labelling connectors and taking photos before removal makes the job much easier.
How long does shipping take?
Orders are shipped by express courier such as DHL, FedEx, UPS or TNT, and you will receive a tracking number by email as soon as your parcel leaves our warehouse.
How to Verify Compatibility
The fastest way to confirm fit is to match the part number 20Y-06-41110 against the tag on your old harness or your parts book. If the tag is missing or unreadable, a few clear photos of the connectors are usually enough for us to identify the right part.
Tips for a Smooth Installation
- Disconnect the battery isolator before starting.
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Check every ground strap and clean its contact surface to bare metal.
- Add protective sleeving wherever the old harness showed signs of rubbing.
- Test lights, horn, solenoids and the monitor before refitting covers.
Ordering Information
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.

English




