20Y-06-24751 Komatsu PC200-6 PC220LC-6 Internal Wire Harness
Keep your Komatsu PC200-6 PC220LC-6 working with the TOPARTS 20Y-06-24751 Internal Wire Harness. It replaces the original harness one-for-one and is built for the vibration, heat and dirt that come with daily work on site.
What This Harness Does
The internal harness lives inside the operator's cab and connects everything the operator touches and sees: the monitor, switch panels, joysticks, key switch, controllers and relays. It is the link between the operator's commands and the rest of the machine.
Protected from weather but not from wear, the cab harness flexes every time a seat is adjusted, a console is moved or a panel is opened. Over the years, these small movements loosen terminals and fatigue wires, especially behind the seat and under the floor plate.
Komatsu machines use monitor-based diagnostics, and a harness fault frequently appears as an error code that clears and returns. Replacing worn wiring is a common fix for these recurring codes.
How to Verify Compatibility
The fastest way to confirm fit is to match the part number 20Y-06-24751 against the tag on your old harness or your parts book. If the tag is missing or unreadable, a few clear photos of the connectors are usually enough for us to identify the right part.
Maintenance Advice
Avoid aiming a pressure washer directly at connectors and the ECM. Water forced past the seals is a common cause of corrosion and intermittent faults. A light spray and a dry cloth are kinder to the electrical system.
Installation Guide
- Remove the seat or console covers as needed to get clear access.
- Unplug the monitor and controller connectors carefully and check their locking tabs.
- Route the harness exactly as the original to avoid pinching under floor plates or seat rails.
- Test every switch and the monitor before refitting the panels.
Why Full Replacement Pays Off
Splicing a damaged section can get a machine moving again, but each joint is a new point of failure. Old wire around the repair is usually just as aged as the part that broke, so the next fault is often not far away. A complete new harness resets the clock on the entire circuit.
When to Replace It
Typical signs include:
- Switches on the console that do nothing or work only sometimes
- Joystick or work mode functions not responding
- Faults that appear when the seat or console is moved
- Key switch or start circuit failing intermittently
- Monitor flickering, going blank or resetting while working
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Specs at a Glance
- Part Name: Internal Wire Harness
- Part Number: 20Y-06-24751, 20Y0624751
- Condition: Aftermarket new
- Product Weight: 2.5 kg / 5.51 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Compatible Models
Komatsu PC200-6, PC220LC-6
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.

English




