6261-81-8910 Diesel Engine Wiring Harness for Komatsu PC800-8 PC600-8
When the original harness on your Komatsu PC800-8 PC600-8 has worn out, the 6261-81-8910 Engine Diesel Wiring Harness is a straightforward way to get the machine back to full function. It is made to the same layout as the original, with matching connectors at every branch.
How It Works on Your Machine
Every start, every throttle change and every load the excavator takes on is managed through this harness. It routes power and data between the ECM and the engine-mounted components, so a single damaged wire here can show up as a problem anywhere in the engine's behaviour.
Mounted directly on the engine, this harness bundles the circuits that connect the electronic control unit with the parts doing the real work: sensors that measure, and actuators that respond. Clean, uninterrupted signals here are what allow the engine to run smoothly and efficiently.
Komatsu excavators are known for long service lives, and many keep working well past the point where their original wiring has aged. A new harness is often the key to keeping an older Komatsu reliable.
Common Questions
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
What should I do if the part does not match?
Contact us with photos of the original and the new part. We will help you resolve the issue quickly.
Fitting Advice
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Clean and inspect the ECM connector pins; bent pins cause more faults than people expect.
- Keep the new harness clear of the exhaust manifold and turbocharger, and refit all heat shields.
- Clear stored fault codes after installation and run the engine to working temperature to confirm everything reads correctly.
How to Verify Compatibility
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Replace or Repair?
Patching wiring takes time: tracing the fault, cutting, crimping and sealing, often in an awkward position. When the insulation is hardened along the whole length, that time is better spent fitting a new harness that solves every weak spot at once.
How to Tell It Is Time for a New One
Typical signs include:
- Problems that come and go when the engine heats up or when the machine vibrates
- Engine cranks but will not start, or starts only after several attempts
- Gauges for engine temperature or oil pressure reading erratically
- Fault codes for sensors, injectors or the ECM appearing on the monitor
- Sudden loss of power or the engine entering a derated mode
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Specifications
- Part Name: Engine Diesel Wiring Harness
- Part Number: 6261-81-8910, 6261818910
- Condition: Aftermarket new
- Product Weight: 6 kg / 13.23 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Fits the Following Machines
Komatsu PC800-8, PC600-8, WA500-3, etc
Shipping and Payment
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.

English




