8-97362843-7 87597922 KRH10740 Engine Wire Harness for Sumitomo SH240 A5 4HK1 Engine
Part number 8-97362843-7 87597922 is the Engine Wire Harness used on Sumitomo SH240, A5 excavators. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
It is used with the 4HK1 engine and is matched to that engine's sensor and connector layout.
Specifications
- Part Name: Engine Wire Harness
- Part Number: 8-97362843-7, 87597922, KRH10740, 8973628437
- Engine: 4HK1
- Condition: Aftermarket new
- Product Weight: 3.5 kg / 7.72 lbs
- Brand: TOPARTS
- Feature: Original connector layout; plug-and-play installation
Compatible Models
Sumitomo SH240 A5 4HK1 Engine
Why This Harness Matters
Every start, every throttle change and every load the excavator takes on is managed through this harness. It routes power and data between the ECM and the engine-mounted components, so a single damaged wire here can show up as a problem anywhere in the engine's behaviour.
The Engine Wire Harness is the nerve center of the engine bay. It links the engine control module to the sensors, injectors and actuators that keep combustion on target, carrying every signal the ECM needs to read speed, temperature and pressure and respond in milliseconds.
Many Sumitomo electrical designs are shared with Case models, so correct part number matching is especially important.
Tips for a Smooth Installation
- Label each connector on the old harness with masking tape before you unplug anything.
- Photograph the routing, clip positions and ground points from several angles.
- Clean and inspect the ECM connector pins; bent pins cause more faults than people expect.
- Keep the new harness clear of the exhaust manifold and turbocharger, and refit all heat shields.
- Clear stored fault codes after installation and run the engine to working temperature to confirm everything reads correctly.
Frequently Asked Questions
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
How do I know it will fit my machine?
Match the part number on your old harness, or send us your machine model and serial number and we will confirm before you order.
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
Looking After Your Wiring
Once the new harness is fitted, a quick look during routine services goes a long way. Check for rubbing points, loose clamps and oil contamination, and keep the engine bay and battery area clean so that debris does not build up around the wiring.
Common Symptoms of a Failing Harness
Typical signs include:
- Engine cranks but will not start, or starts only after several attempts
- Gauges for engine temperature or oil pressure reading erratically
- Sudden loss of power or the engine entering a derated mode
- Engine stalling, misfiring or running roughly at idle
Intermittent faults like these are classic signs of ageing wiring, and they rarely improve on their own.
What You Get with TOPARTS
Each harness is produced under strict quality control, with wire gauges, colours and connector types matched to the original specification. Terminals are crimped for secure contact, and the bundle is protected with sleeving where the original used it.
Order & Delivery
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.

English




