87597924 Engine Injector Wiring Harness for CX210B 4HK1
Part number 87597924 is the Injector Wiring Harness used on Case CX210B excavator. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
Part Information
- Part Name: Injector Wiring Harness
- Part Number: 87597924
- Condition: Aftermarket new
- Product Weight: 1.5 kg / 3.31 lbs
- Brand: TOPARTS
- Warranty: 6 months
- Feature: Quality checked before shipping; built for heavy-duty use
Application
Case CX210B
Why This Harness Matters
The injector harness is short, but it carries some of the most critical signals on the engine. A weak connection on a single injector circuit can make one cylinder go dead, causing vibration, smoke and a noticeable loss of power.
Sitting under the valve cover or alongside the cylinder head, the injector harness works in one of the hottest and oiliest places on the engine. It delivers the high-current firing signals the injectors need, cylinder by cylinder, thousands of times a minute.
Case excavators share many electrical designs with Sumitomo models, and harness condition plays a big part in their reliability as machines age.
Signs Your Harness Needs Replacing
Typical signs include:
- Hard starting and reduced power under load
- One or more cylinders misfiring
- Rough idle and increased engine vibration
- Black or white smoke from the exhaust
If these symptoms persist after checking fuses, batteries and grounds, the wiring itself is the next thing to suspect.
Before and During Installation
- Clean the area around the valve cover thoroughly before opening it, so no dirt reaches the injectors.
- Note the cylinder order of each injector lead before disconnecting.
- Inspect injector terminals and nuts; tighten to the specified torque.
- Replace the valve cover gasket and any pass-through seals while you are in there.
- Clear codes and check that the engine runs smoothly on all cylinders.
The Cost of Waiting
Electrical problems tend to get worse rather than better. Replacing a deteriorating harness at a planned service interval is far cheaper than dealing with a breakdown in the middle of a job, especially on remote sites.
Made to Last on the Job Site
The goal is simple: a harness that fits like the original and keeps working like it. Matching connectors, correct branch lengths and durable insulation mean stable performance and high reliability in daily heavy-duty use.
Check Fitment Before Ordering
Before ordering, compare the part number printed on the label of your original harness with 87597924. It is also worth comparing the connector shapes and the number of branches with our product photos. If your machine's serial range or engine variant differs, send us your machine details and we will confirm compatibility before you buy.
Payment & Shipping
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.

English




