207-06-76110 Main Wiring Harness for PC300-8 PC350-8
Part number 207-06-76110 is the Main Wiring Harness used on Komatsu PC300-8, PC350-8 excavators. This aftermarket replacement from TOPARTS is designed to fit in place of the original without cutting, splicing or rerouting.
Specs at a Glance
- Part Name: Main Wiring Harness
- Part Number: 207-06-76110, 2070676110
- Condition: Aftermarket new
- Product Weight: 16 kg / 35.27 lbs
- Brand: TOPARTS
- Feature: Strict quality control standards; stable performance and high reliability
Fits the Following Machines
Komatsu PC300-8
Why This Harness Matters
Where the engine harness serves the engine, the external or main harness serves the whole machine. It connects the major systems of the excavator, so when it is damaged the symptoms can appear in places that seem unrelated: lights, gauges, solenoids, starting and more.
Because it runs through the most exposed areas of the machine, the main harness takes more abuse than almost any other electrical part. Swinging, vibration, dust, washdowns and rodents all take their toll, which is why it is one of the most commonly replaced harnesses on older machines.
Komatsu excavators are known for long service lives, and many keep working well past the point where their original wiring has aged. A new harness is often the key to keeping an older Komatsu reliable.
Before and During Installation
- Disconnect the battery isolator before starting.
- Work section by section, transferring clips and ties as you go, rather than removing the whole harness at once.
- Check every ground strap and clean its contact surface to bare metal.
- Test lights, horn, solenoids and the monitor before refitting covers.
Confirming Fitment
Model names are not always enough to confirm fitment, because manufacturers sometimes change harness designs within a model's production run. Check the part number on your existing harness, or send us your machine model and serial number, and we will check it for you.
Common Questions
How long does shipping take?
Orders are shipped by express courier such as DHL, FedEx, UPS or TNT, and you will receive a tracking number by email as soon as your parcel leaves our warehouse.
Is this harness plug-and-play?
Yes. It is built to the original layout with matching connectors, so it installs in place of the original without cutting or splicing.
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
Built for Heavy-Duty Work
TOPARTS harnesses are made to the original layout so that every connector reaches its component without strain. Protective conduit and tape guard the wires against abrasion, heat and oil in the engine bay and around the frame.
How to Tell It Is Time for a New One
Watch for these symptoms:
- Rodent damage, crushed sections or wires worn through where the harness rubs the frame
- Monitor warnings that disappear when the machine is stopped
- Hydraulic functions slowing down or stopping because solenoids lose signal
- Work lights, horn or wipers working only some of the time
When diagnostics point to a circuit fault rather than a failed component, replacing the wiring is often the most cost-effective repair.
Ordering Information
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.

English




